When the cone does this I need to adjust the program


Friday 10th May 2019

This is a insight-live.com/glossary/119">cone 04. It is bent too much, the kiln has over-fired a little (cone 03 was also bent somewhat). The built-in firing schedule goes to 1945, that would be much more over-fired than this was (and the built-in ones do not soak, drop-and-soak or slow cool). It only takes a minute to edit the program I made, all I have done is drop the step-three temperature to 1930 (it was 1935). I adjust my schedule fire-up-to temperature as needed, I cannot imagine not doing this.

Pages that reference this post in the Digitalfire Reference Library:

Are you using your expensive kiln like a pop-up toaster?, Manually programming a Bartlett V6-CF hobby kiln controller, Firing Schedule


This post is one of thousands found in the Digitalfire Reference Database. Most are part of a timeline maintained by Tony Hansen. You can search that timeline on the home page of digitalfire.com.